Front matter#
| ELECTRICAL CERTIFICATE OF TEST Business Trading Name: | ocument h |
|---|---|
| d | |
| Project Location: | Project/Works Order Number: This |
(A)#
(mm2)#
(ms/ms)#
Serial ##
| Test type | Serial # | Cal. date |
|---|---|---|
| Continuity: | ||
| Insulation Resistance | ||
| Polarity | ||
| Fault Loop Impedance | ||
| RCD tester | ||
| Temperature | ||
| Others |
RCD#
Project Location:#
Test Instruments used:#
Tripping time#
0O /180O#
| Circuit Number and Phase | Circuit Designation Consumers Mains Submains Subcircuit | Load (A) | Type of Wiring | Number of Points Served | permitted time. disconnection Maximum 0.4s or 5s | Over current Protective Device | n | Continuity | Insulation Resistance (Leave comments if 500VDC not used) | Connections Circuit Correct a | Correct & Tested Polarity a | Fault Loop Impedance (LV) or Fault Loop Resistance (ELV) | RCD | devices, S/B protection & equipment of Labelling a | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| (Number of Cores, CSA (mm²), Type) insulation/Sheat material | MCB, RCBO or Fuse | (D) Rating or (C) Overload (B) Type (A) | Rating Interrupt (kA) | RCD (mA) | Visual Inspectio | ≤ Conductor 0.5Ω Earth Main (Ω) | 0.5Ω ≤ Bonding (Ω) | Earth Continuity Protective (Ω) | Phase / Phase (MΩ) | Neutral / Phase (MΩ) | Earth / Phase (MΩ) | Earth / Neutral (MΩ) | Temperature. Reference (ₒC) | NEUTRAL TO PHASE (Ω) | EARTH TO PHASE (Ω) | time /180O Tripping 0O (ms/ms) | Button Test a | |
| Size | ||||||||||||||||||
| Earth/PE (mm2) | ||||||||||||||||||
| a | ||||||||||||||||||
| COMMENTS: | ||||||||||||||||||
| I CERTIFY THAT THE ELECTRICAL INSTALLATION, TO THE EXTENT IT IS AFFECTED BY THE ELECTRICAL WORK, HAS BEEN TESTED TO ENSURE IT IS ELECTRICALLY SAFE AND IS IN ACCORDANCE WITH THE REQUIREMENTS OF THE WIRING RULES AS/NZS 3000 AND ANY OTHER STANDARD APPLYING TO THE ELECTRICAL INSTALLATION UNDER THE ELECTRICAL SAFETY REGULATION 2013. □ YES □ NO | ||||||||||||||||||
| Detai Tests m | ls of Electrical Mechanic Performing Tested By: Signature: Date: . License Number: | |||||||||||||||||
| Detai or | Endorsed By: Signature: Date: ls of Electrical Contractor. License Number: | |||||||||||||||||
| F Cust t | Received By: Signature: Date: omer Details. Position: | |||||||||||||||||
| e | ||||||||||||||||||
| Res |
Table in words
- The installation data table records the circuit number and phase, the circuit designation, the load in amperes, the type of wiring, the number of points served, the permitted disconnection time of maximum 0.4s or 5s, the over current protective device, continuity, insulation resistance, connections circuit correct, correct and tested polarity, fault loop impedance (LV) or fault loop resistance (ELV), RCD, and labelling of devices, S/B protection and equipment.
- The installation data table records the number of cores, CSA (mm²), type, insulation/sheath material, size, and earth/PE (mm2).
- The installation data table records the MCB, RCBO or Fuse, the (D) rating or (C) overload (B) type (A), the rating interrupt (kA), the RCD (mA), visual inspection, the earth main conductor ≤ 0.5Ω, the bonding ≤ 0.5Ω, the protective earth continuity, the phase/phase (MΩ), the neutral/phase (MΩ), the earth/phase (MΩ), the earth/neutral (MΩ), the reference temperature (ₒC), the neutral to phase (Ω), the earth to phase (Ω), the tripping time 0O/180O (ms/ms), and the button test.
- The installation data table records the comments.
- The installation data table records the certification that the electrical installation, to the extent it is affected by the electrical work, has been tested to ensure it is electrically safe and is in accordance with the requirements of the wiring rules AS/NZS 3000 and any other standard applying to the electrical installation under the Electrical Safety Regulation 2013, with yes or no options.
- The installation data table records the details of electrical mechanic performing tests, tested by, signature, date, and license number.
- The installation data table records the details of electrical contractor, endorsed by, signature, date, and license number.
- The installation data table records the customer details, received by, signature, date, and position.