Appendix ATest sheet#
Appendix A: Test sheet
| Characteristic | Description/Value |
|---|---|
| Generator Characteristics | |
| Generator make/model | |
| Generator type (conventional/inverter) | |
| Rated AC output (kVA) | |
| Power factor | |
| AC output (W) | |
| Rated voltage (V) | |
| Rated frequency (Hz) | |
| In-built AC protection type (fuse, breaker, relay etc.) | |
| In-built protection rating (A) | |
| Prospective short circuit current at generator terminals | |
| Dry weight (kg) | |
| Secondary protective device characteristics | |
| Secondary protective device type (if any) | |
| Secondary protection rating (A) | |
| Time delay (ms) (for time-current relays) | |
| Load characteristics | |
| Load description | |
| Max demand (A) | |
| max EFLI (Ω) | |
| Test settings and results | |
| Description of measuring instrument | |
| EFLI at location of induced fault (Ω) | |
| Type of fault (A-N, A-PE) | |
| Fault clearance time (ms) | |
| Fault current (A RMS) | |
| Certification | |
| Certifying Engineer | |
| Signature | |
| RPEQ # |
Table in words
- The generator characteristics include generator make/model.
- The generator characteristics include generator type (conventional/inverter).
- The generator characteristics include rated AC output (kVA).
- The generator characteristics include power factor.
- The generator characteristics include AC output (W).
- The generator characteristics include rated voltage (V).
- The generator characteristics include rated frequency (Hz).
- The generator characteristics include in-built AC protection type (fuse, breaker, relay etc.).
- The generator characteristics include in-built protection rating (A).
- The generator characteristics include prospective short circuit current at generator terminals.
- The generator characteristics include dry weight (kg).
- The secondary protective device characteristics include secondary protective device type (if any).
- The secondary protective device characteristics include secondary protection rating (A).
- The secondary protective device characteristics include time delay (ms) (for time-current relays).
- The load characteristics include load description.
- The load characteristics include max demand (A).
- The load characteristics include max EFLI (Ω).
- The test settings and results include description of measuring instrument.
- The test settings and results include EFLI at location of induced fault (Ω).
- The test settings and results include type of fault (A-N, A-PE).
- The test settings and results include fault clearance time (ms).
- The test settings and results include fault current (A RMS).
- The certification includes certifying engineer.
- The certification includes signature.
- The certification includes RPEQ #.