SECTION A3BOLLARDS CHECKLIST#
The applicant is to complete shaded boxes only.
A3.1SIZE#
A3.1 SIZE
| Requirement | Pass (Y / N) | Pass (Y / N) | |
|---|---|---|---|
| Is the product comprised of a parallel sided or tapered tube of fluorescent orange or red material that is resilient to impact? | ☐ Yes ☐ No | ☐ Yes ☐ No | |
| Is the product at least 900 mm in height and 100 mm in diameter? | ☐ Yes ☐ No | ☐ Yes ☐ No | |
| Is the product designed to be stable under reasonably expected wind conditions and air turbulence from passing traffic? | ☐ Yes ☐ No | ☐ Yes ☐ No |
A3.2RETROREFLECTIVE BANDS#
A3.2 RETROREFLECTIVE BANDS
| Requirement | Pass (Y / N) | Pass (Y / N) |
|---|---|---|
| Is the retroreflective band width and position compliant with Table 4.6 of the Queensland Manual of Uniform Traffic Control Devices Part 3? | ☐ Yes ☐ No | ☐ Yes ☐ No |
A3.3REFLECTIVE PROPERTIES#
A3.3 REFLECTIVE PROPERTIES
| Requirement | Pass (Y / N) | Pass (Y / N) | |
|---|---|---|---|
| Is the retroreflective element of the product currently accepted by the Department of Transport and Main Roads? If not, a concurrent application for the retroreflective sheeting is required. | ☐ Yes ☐ No | ☐ Yes ☐ No | |
| Is the retroreflective element marked in accordance with AS 1906.1:2017 Clause 2.11 to include: • The manufacturer's identification logo or symbol; and • Product identification code? | ☐ Yes ☐ No | ☐ Yes ☐ No | |
| Has a product sample been sent to TMR? Application will not be progressed until sample is received. | ☐ Yes ☐ No | ☐ Yes ☐ No |