Skip to content

TTM WIKIby TekSwipe Traffic

Sign in

November 2025#

Part	Section	Change type	Description of change
2	1.3	Administrative	• Updated references due to changes within other clauses.

Part	Section	Change type	Description of change
	1.4.15	Amendment	• Deleted Queensland definition Registered Professional Engineer of Queensland (RPEQ), which is now included in the Queensland MUTCD Part 0.
	1.4.16	Administrative	• Clause renumbered due to the above deletion.
	1.8	Amendment	• Deleted clause to remove the option to override mandatory requirements.
	2.14	Amendment	• Relocated Figure 2.14.1 to Queensland MUTCD Part 10.
	5.3.10.1	Amendment	• Harmonised dimensions of audio tactile line marking (ATLM) with AS 1742.2. • Amended previous reference to the Queensland Guide to Road Safety (QGRS) Part 2 to the Road Planning and Design Manual (RPDM) Part 6.
	5.3.10.2	Amendment	• Harmonised with AS 1742.2.
	5.3.10.3	Amendment	• Harmonised with AS 1742.2.
	5.3.10.4	Amendment	• Harmonised with AS 1742.2.
	5.4.2.1	Amendment	• Harmonised with AS 1742.2. • Simplified reference to the Road Planning and Design Manual (RPDM) Part 3.
	5.4.2.2	Administrative	• Simplified reference to the Road Planning and Design Manual (RPDM) Part 3.
	5.4.2.5	Amendment	• Harmonised with AS 1742.2.
3	Relationship Table	Administrative	• Added new Clause 1.3.26 Side Road (ON SIDE ROAD message). • Changed Clauses 4.6.9, 4.8.4 and 4.20.1 ‘Accepted with amendments’.
3	1.3.13	Amendment	• Added reference to Clause 1.9 b) for guidance on variations to ‘shall’ requirements.
3	1.3.14	Amendment	• Added reference to Clause 1.9 a) for guidance on variations to ‘should’ recommendations.
3	1.3.25	Amendment	• Deleted information and added reference to “should” and Clause 1.3.14.
3	1.3.26	New	• Added new definition of Side Road (ON SIDE ROAD message). • Included a reference to Clause 4.6.7 for the use of the ON SIDE ROAD message.

Part	Section	Change type	Description of change
	1.5	Amendment	• Added information for devices which are recommended by the Austroads Innovative Temporary Traffic Management Device and Solution Assessment (AITDSA) Scheme.
	1.7	Amendment	• Clarified that an Event Traffic Marshal is a volunteer.
	1.9	Amendment	• Added the requirement to document sound judgement and reasoning through a risk assessment process to demonstrate the acceptability and safety of the varied approaches. • Removed the requirement for an RPEQ to also hold the TMD competency when signing off mandatory requirements that are not adopted or for innovative treatments. • Added the RPEQ is only required to certify that portion of the TMP and/or TGS design impacted by or related to departures from the mandatory requirements.
	3.4.4	Amendment	• Remove reference to subsection Designing a speed limit.
	4.2.2	Amendment	• Entire clause now included in the MUTCD, information which was remaining in AS1742.3 has been relocated to the MUTCD. • Added guidance in item g) on the recommended location of a 600x600 yellow retroreflective blank panel.
	4.6.2	Amendment	• Added T1-Q06, a 600x900 version of the ROAD WORK AHEAD sign.
	4.6.7	Amendment	• Added requirements for using the ON SIDE ROAD message. • Modified text to align with ON SIDE ROAD message requirements. • Added ROAD PLANT ON SIDE ROAD sign.
	4.6.9	Amendment	• Added requirements for SIDE ROAD CLOSED message to align with the requirements for using ON SIDE ROAD in Clause 4.6.7.
	4.7.6	Amendment	• Adjusted terminology for default speed limits to match other TMR documents (built up area and not in a built up area).
	4.8.3	Amendment	• Added “only” to the requirements for using the Detour U-turn (symbolic) (TM5-1-Q02) panel.
4.8.4	Amendment	• Added recommended locations of the Detour marker (TM5-6A) arrow in an MMS arrangement.
4.9.1	Amendment	• Change sign number for the advisory speed MMS panel from TM6-16 to TM3-16.
4.20.1	Amendment	• Added TM2-25-Q01C Trucks 1200x600 MMS sign.
Appendix A Table A.1	Amendment	• Added ROAD PLANT ON SIDE ROAD (TM1-48C) and additional notes referencing Clause 4.6.7 and noting that this panel is the same as TM1-27C. • Added SIDE ROAD CLOSED (TM2-43A) and additional notes referencing Clause 4.6.9. • Added WATER OVER ROAD (TM3-21A) and additional notes relating to the use of this MMS panel. • Added notes to the use of the ON SIDE ROAD panel to align with the requirements of using the ON SIDE ROAD message in Clause 4.6.7 and corrected the 600 x 600 arrow sign reference number. • Added ON SIDE ROAD with arrow (TM5-10B) and additional notes to align with the requirements of using the ON SIDE ROAD message in Clause 4.6.7. • Added EVENT ON SIDE ROAD (TM9-4C-Q01) and additional notes to align with the requirements of using the ON SIDE ROAD message in Clause 4.6.7. • Added notes to the use of the event ON SIDE ROAD with arrow (TM9-5B) panel to align with the requirements of using the ON SIDE ROAD message in Clause 4.6.7.

Part	Section	Change type	Description of change
	Appendix A Table A.2	Amendment	• Added new BUILDING WORK AHEAD (TM1-1-Q01A and TM1-1-Q01C) options and additional notes the use of these MMS panels. • Added new 1200x600 Trucks (TM2-25-Q01C) MMS panel. • Amended the notes to the Detour U-Turn symbolic panel (TM5-1-Q02). • Deleted PLANT AHEAD 1200x300 MMS sign (TM1- 27-Q01). Use ROAD PLANT AHEAD (TM1-3-1A or TM1-3-2C) panels. • Deleted ROADWORK 600x600 and 1200x300 MMS signs (TM1-5-Q01A and TM1-5-Q01B). Use standard sign ROADWORK (TM2-26A and TM2-26B). • Added notes to the use of the WATER OVER ROAD (TM3-21-Q01) sign.
Appendix B Figure B2	Amendment	• Amended Figure B2
Appendix C Table C.2	Amendment	• Amended notes to ROADWORK AHEAD (T1-Q06) sign.

Drawings from the original pages

Page 1 of MUTCD Amendment Register

Source: MUTCD Amendment Register · pages 1–5 Open PDF at this page Search this document