DRIVE TO PREVAILING BEACH CONDITIONS SUPPLEMENTARY PLATE#

a	b	c	d	e	r
A	2000	250	5	15	80C	25
B	2600	350	5	15	105C	25
C	3900	500	10	30	160C	50

ON BRIBIE ISLAND 80 ON BEACHES 30 ON ACCESS TRACKS UNLESS SIGNED OTHERWISE.

Colour Legend DRIVE TO PREVAILING BEACH CONDITIONS Class 400 retroreflective yellow Black.

Example.

Department of Transport and Main Roads Infrastructure Management & Delivery Division APPROVED AS OFFICIAL TRAFFIC SIGN 19/05/25 A/PRINCIPAL ENGINEER Date (Traffic Engineering Practice) G9-040-Q14 2 _ Page 2 of 2.

Designed RH 05/25 Checked DJ 05/25 Scale Not to Scale A.

a	b	c	d	e	r
2000	250	5	15	80C	25
2600	350	5	15	105C	25
3900	500	10	30	160C	50

View this figure on page 81 of the PDF ↗

G9-100-Q01 1p. 81

450 · R50 · 38 · 30 · 400 · 348 · 750 · 14 · 50 · UNDERPASS · 60B · 30 · SUBJECT TO · 350 · 60B · 30 · FLOODING · 60B · 10 · 60 · Note: For guidance on the use of this sign refer to the Queensland MUTCD Part 10. · Colour Legend · Class 400 retroreflective white · Class 400 retroreflective blue · UNDERPASS SUBJECT TO FLOODING

Department of Transport and Main Roads Infrastructure Management & Delivery Division APPROVED AS OFFICIAL TRAFFIC SIGN 16/04/25 A/PRINCIPAL ENGINEER Date (Traffic Engineering Practice) G9-100-Q01 1 _ Page 1 of 2 Designed RH 04/25 Checked JP 04/25 Scale Not to Scale A

View this figure on page 82 of the PDF ↗

G9-100-Q01 2p. 82

450 · R50 · 55 · 30 · 310 · 240 · 15 · 50 · 750 · PATH SUBJECT · 60B* · 30 · TO FLOODING · 60B · 440 · 30 · INDICATORS · 60B · 30 · SHOW DEPTH · 60B · 10 · 60 · Notes: 1. For guidance on the use of this sign refer to the Queensland MUTCD Part 10. · 2. * Reduce character spacing by 10%, · Colour Legend · Class 400 retroreflective white · Class 400 retroreflective blue · PATH SUBJECT TO FLOODING INDICATORS SHOW DEPTH

Department of Transport and Main Roads Infrastructure Management & Delivery Division APPROVED AS OFFICIAL TRAFFIC SIGN 16/04/25 A/PRINCIPAL ENGINEER Date (Traffic Engineering Practice) G9-100-Q01 2 _ Page 2 of 2 Designed RH 04/25 Checked JP 04/25 Scale Not to Scale A

View this figure on page 83 of the PDF ↗

G9-100-Q02 1p. 83

a · a · n · o · p · q · n · n · o · p · q · n · r · r · f · f · m · m · h · h · g · g · b · b · f · f · PEDESTRIANS · PEDESTRIANS · d · d · e · e · MUST CROSS · MUST CROSS · d · d · e · e · AT SIGNALS · AT SIGNALS · d · d · c · c · n · s · n · n · s · n · G9-100-Q02 1(L) · G9-100-Q02 1(R) · _ · _ · a · b · c · d · e · f · g · h · m · n · o · p · q · s · r · SIZE A · 225 · 300 · 16 · 26C · 13 · 20 · 30 · 20 · 90 · 55 · 45 · 30 · 40 · 115 · 15 · SIZE B · 600 · 800 · 40 · 70C · 35 · 55 · 80 · 50 · 240 · 145 · 120 · 80 · 110 · 310 · 40 · Note: For guidance on the use of this sign refer to the Queensland MUTCD Part 10. · Colour Legend · Class 400 retroreflective white · Black · PEDESTRIANS MUST CROSS AT SIGNALS

Department of Transport and Main Roads Infrastructure Management & Delivery Division APPROVED AS OFFICIAL TRAFFIC SIGN 16/04/25 A/PRINCIPAL ENGINEER Date (Traffic Engineering Practice) G9-100-Q02 1 _ Page 1 of 2 Designed RH 04/25 Checked JP 04/25 Scale Not to Scale A

View this figure on page 84 of the PDF ↗

G9-100-Q02 2p. 84

a · a · n · o · p · q · n · n · o · p · q · n · r · r · f · f · m · m · h · h · b · b · g · g · f · f · PEDESTRIANS · PEDESTRIANS · d · d · e · e · MUST CROSS · MUST CROSS · d · d · e · e · AT FACILITY · AT FACILITY · d · d · c · c · t · s · t · t · s · t · G9-100-Q02 2(L) · G9-100-Q02 2(R) · _ · _ · a · b · c · d · e · f · g · h · m · n · o · p · q · s · t · r · SIZE A · 225 · 300 · 16 · 26C · 13 · 20 · 30 · 20 · 90 · 25 · 45 · 5 · 125 · 115 · 115 · 15 · SIZE B · 600 · 800 · 40 · 70C · 35 · 55 · 80 · 50 · 240 · 65 · 120 · 15 · 335 · 310 · 145 · 40 · Note: For guidance on the use of this sign refer to the Queensland MUTCD Part 10. · Colour Legend · Class 400 retroreflective white · Black · PEDESTRIANS MUST CROSS AT FACILITY

Department of Transport and Main Roads Infrastructure Management & Delivery Division APPROVED AS OFFICIAL TRAFFIC SIGN 16/04/25 A/PRINCIPAL ENGINEER Date (Traffic Engineering Practice) G9-100-Q02 2 _ Page 2 of 2 Designed RH 04/25 Checked JP 04/25 Scale Not to Scale A

View this figure on page 85 of the PDF ↗

G9-100-Q03p. 85

600 · 175 · R50 · 50 · 30 · 350 · 700 · 30 · UNDERPASS · 80 · C · 30 · 110 · 1050 · 125 · Notes: 1. For guidance on the use of this sign refer to the Queensland MUTCD Part 10. · 2. The arrow may be left or right. · Colour Legend · Class 400 retroreflective white · Black · PEDESTRIAN UNDERPASS · Department of Transport and Main Roads · Infrastructure Management & Delivery Division · APPROVED AS OFFICIAL TRAFFIC SIGN 17/04/25 · A/PRINCIPAL ENGINEER · Date · (Traffic Engineering Practice) · Designed RH 04/25 · Checked JP 04/25 · Scale Not to Scale · A

View this figure on page 86 of the PDF ↗

G9-100-Q04p. 86

G9-100-Q04(L) · G9-100-Q04(R) · a · b · c · d · e · f · g · h · r · SIZE A 450 600 5 15 45 145 50 315 50 · SIZE B 600 800 10 30 60 190 70 420 50 · SIZE C 750 1000 10 30 75 240 85 525 50 · PEDESTRIANS · G9-100-Q05 1 · MUST USE · FOOTPATH · Example · Colour Legend · Note: For guidance on the use of this sign refer to the Queensland MUTCD Part 10. · Class 400 retroreflective white · Black · PEDESTRIAN DIRECTION · Department of Transport and Main Roads · Infrastructure Management & Delivery Division · APPROVED AS OFFICIAL TRAFFIC SIGN 22/04/25 · A/PRINCIPAL ENGINEER · Date · (Traffic Engineering Practice) · Designed RH 04/25 · Checked JP 04/25 · Scale Not to Scale · A

a	b	c	d	e	f	g	h	r
SIZE A	450	600	5	15	45	145	50	315	50
SIZE B	600	800	10	30	60	190	70	420	50
SIZE C	750	1000	10	30	75	240	85	525	50

View this figure on page 87 of the PDF ↗

G9-100-Q05 1p. 87

a · r · e · PEDESTRIANS · f · d · g · MUST USE · b · f · g · FOOTPATH · c · f · e · a · b · c · d · e · f · g · r · A 450 300 5 15 40 50C 35 50 · B 600 400 10 30 54 66C 47 50 · C 750 500 10 30 67 82C 60 50 · Note: For guidance on the use of this sign refer to the Queensland MUTCD Part 10. · G9-100-Q04(L) · PEDESTRIANS · Colour Legend · MUST USE FOOTPATH · Class 400 retroreflective white · Example · Black · PEDESTRIANS MUST USE FOOTPATH SUPPLEMENTARY PLATE · Department of Transport and Main Roads · Infrastructure Management & Delivery Division · APPROVED AS OFFICIAL TRAFFIC SIGN 22/04/25 · A/PRINCIPAL ENGINEER · Date · (Traffic Engineering Practice) · Designed RH 04/25 · Checked JP 04/25 · Scale Not to Scale · A · Page 1 of 2

a	b	c	d	e	f	g	r
A	450	300	5	15	40	50C	35	50
B	600	400	10	30	54	66C	47	50
C	750	500	10	30	67	82C	60	50

View this figure on page 88 of the PDF ↗

G9-100-Q05 2p. 88

a · r · e · PEDESTRIANS · f · d · g · MUST USE · b · f · g · OVERPASS · c · f · e · a · b · c · d · e · f · g · r · A 450 300 5 15 40 50C 35 50 · B 600 400 10 30 54 66C 47 50 · C 750 500 10 30 67 82C 60 50 · Note: For guidance on the use of this sign refer to the Queensland MUTCD Part 10. · G9-100-Q04(L) · PEDESTRIANS · Colour Legend · MUST USE OVERPASS · Class 400 retroreflective white · Example · Black · PEDESTRIANS MUST USE OVERPASS SUPPLEMENTARY PLATE · Department of Transport and Main Roads · Infrastructure Management & Delivery Division · APPROVED AS OFFICIAL TRAFFIC SIGN 22/04/25 · A/PRINCIPAL ENGINEER · Date · (Traffic Engineering Practice) · Designed RH 04/25 · Checked JP 04/25 · Scale Not to Scale · A · Page 2 of 2

a	b	c	d	e	f	g	r
A	450	300	5	15	40	50C	35	50
B	600	400	10	30	54	66C	47	50
C	750	500	10	30	67	82C	60	50

View this figure on page 89 of the PDF ↗

G9-100-Q06 1 – SCHOOL WALK STOP - NO LOGOSp. 89

225 · 200 · R20 · 30 · 90 · 30 · 30 · SCHOOL 60B · 450 · 30 · WALK 60B · 30 · STOP 60B · 30 · Notes: 1. For guidance on the use of this sign refer to the Queensland MUTCD Part 10. · 2. Where Government, Local Government and school logos are required see G9-100-Q06 · 3. Signs shall be installed so they face away from the traffic and cannot be confused with bus stop signage. · Colour Legend · Class 400 retroreflective white · Class 400 retroreflective blue · SCHOOL WALK STOP - NO LOGOS · Department of Transport and Main Roads Infrastructure Management & Delivery Division · APPROVED AS OFFICIAL TRAFFIC SIGN 22/04/25 A/PRINCIPAL ENGINEER Date (Traffic Engineering Practice) · G9-100-Q06 1 · Page 1 of 4 · Designed RH 04/25 · Checked S JP 04/25 · Scale Not to Scale · A

View this figure on page 90 of the PDF ↗

G9-100-Q06 2 – SCHOOL BIKE STOP - NO LOGOSp. 90

225 · 200 · R20 · 35 · 80 · 35 · 30 · SCHOOL 60B · 450 · 30 · BIKE 60B · 30 · STOP 60B · 30 · Notes: 1. For guidance on the use of this sign refer to the Queensland MUTCD Part 10. · 2. Where Government, Local Government and school logos are required see G9-100-Q06 · 3. Signs shall be installed so they face away from the traffic and cannot be confused with bus stop signage. · Colour Legend · Class 400 retroreflective white · Class 400 retroreflective blue · SCHOOL BIKE STOP - NO LOGOS · Department of Transport and Main Roads Infrastructure Management & Delivery Division · APPROVED AS OFFICIAL TRAFFIC SIGN 22/04/25 A/PRINCIPAL ENGINEER Date (Traffic Engineering Practice) · G9-100-Q06 2 · Page 2 of 4 · Designed RH 04/25 · Checked S JP 04/25 · Scale Not to Scale · A

View this figure on page 91 of the PDF ↗

G9-100-Q06 3 – SCHOOL WALK STOP - WITH LOGOSp. 91

225 · 200 · R20 · 5 · Local Government Logo · 75 · 85 · 10 · 5 · 30 · 90 · 150 · 30 · 30 · SCHOOL 60B · 600 · SCHOOL · 30 · WALK 60B · 300 · 30 · BIKE STOP 60B · STOP · 30 · 5 · School Logo · 50 · 60 · 5 · 175 · Notes: 1. For guidance on the use of this sign refer to the Queensland MUTCD Part 10. · 2. * Insert appropriate local government logo. · 3. ** Insert appropriate school logo. · 4. All logos are to be in corporate colours. · 5. Where logos are not required see G9-100-Q06 1. · 6. Signs shall be installed so they face away from the traffic and cannot be confused with bus stop signage. · Colour Legend · Class 400 retroreflective white · Class 400 retroreflective blue · SCHOOL WALK STOP - WITH LOGOS · Department of Transport and Main Roads Infrastructure Management & Delivery Division · APPROVED AS OFFICIAL TRAFFIC SIGN 22/04/25 A/PRINCIPAL ENGINEER Date (Traffic Engineering Practice) · G9-100-Q06 3 · Page 3 of 4 · Designed RH 04/25 · Checked JP 04/25 · Scale Not to Scale · A

View this figure on page 92 of the PDF ↗

G9-100-Q06 4 – SCHOOL BIKE STOP - WITH LOGOSp. 92

225 · 200 · R20 · 5 · Local Government Logo · 75 · 85 · 10 · 5 · 35 · 80 · 150 · 35 · 30 · SCHOOL 60B · 600 · SCHOOL · 30 · BIKE 60B · 300 · 30 · BIKE STOP 60B · STOP · 30 · 5 · School Logo · 50 · 60 · 5 · 175 · Notes: 1. For guidance on the use of this sign refer to the Queensland MUTCD Part 10. · 2. * Insert appropriate local government logo. · 3. ** Insert appropriate school logo. · 4. All logos are to be in corporate colours. · 5. Where logos are not required see G9-100-Q06 2. · 6. Signs shall be installed so they face away from the traffic and cannot be confused with bus stop signage. · Colour Legend · Class 400 retroreflective white · Class 400 retroreflective blue · SCHOOL BIKE STOP - WITH LOGOS · Department of Transport and Main Roads Infrastructure Management & Delivery Division · APPROVED AS OFFICIAL TRAFFIC SIGN 22/04/25 A/PRINCIPAL ENGINEER Date (Traffic Engineering Practice) · G9-100-Q06 4 · Page 4 of 4 · Designed RH 04/25 · Checked JP 04/25 · Scale Not to Scale · A

2900#

350

400

240

1560

350

R100

150

210

140DN

400

140DN

140DN/

460

90LC

2000

180ModE/

135LC

120

180ModE/

1100

135LC

120

180ModE/

135LC

150

190

Colour Legend Retroreflective white Example Retroreflective brown

TOURIST DRIVE REASSURANCE SIGN “... TOURIST DRIVE LENGTH ...km”

Department of Transport and Main Roads Infrastructure Management & Delivery Division APPROVED AS OFFICIAL TRAFFIC SIGN 06/03/18 PRINCIPAL ENGINEER Date (Traffic Engineering) G11-1-Q01

Designed RH 03/18 Checked DJ 03/18 Scale Not to Scale

1800

R30

100

162

NATIONAL

100D

450

325

308

125

TRAIL

100D

163

100

115

125

115

Colour Legend Non-retroreflective brown Retroreflective white

NATIONAL TRAIL DIRECTION SIGN

Department of Transport and Main Roads Infrastructure Management & Delivery Division APPROVED AS OFFICIAL TRAFFIC SIGN 24/05/16 PRINCIPAL ENGINEER Date (Traffic Engineering) G11-Q01

Designed RH 2/96 Checked JD 2/96 Scale Not to Scale

A B

TURN RIGHT 500m FOR WHITSUNDAY

10x

ACCESS TO BARRIER REEF ISLANDS 26 km

3000

1200

150

r30

145

TURN RIGHT 500m

125C/(lc)

FOR

125C

WHITSUNDAY

125C

170

1500

ACCESS TO

100C

BARRIER REEF ISLANDS

100C

26 km

125E/(lc)

150

Typical dimension example

Colour Legend Retroreflective brown Notes: Retroreflective white 1. ‘x’ to be a minimum of 150mm (i.e. minimum sign depth = 1200 mm). Retroreflective yellow 2. For colour and shape of symbol see TC9328. Retroreflective green

INFORMATION SIGN (TOURIST) TYPICAL “RESORT/AREA” SIGN

Department of Transport and Main Roads Infrastructure Management & Delivery Division APPROVED AS OFFICIAL TRAFFIC SIGN 27/06/16 PRINCIPAL ENGINEER Date (Traffic Engineering) G11-Q02

Designed RH 2/96 Checked JD 2/96 Scale Not to Scale

A B

Welcome to

TOWN NAME

Welcome to

MISSION BEACH

Image

k##

Example

Colour Legend Retroreflective white Retroreflective blue a b b c d e f g h k m n o p q r1 r2 max Retroreflective yellow TC1345 _1A (S roin ag dle w ala yn )e 2400 1200 1800 400 20 16 250 140Em 40 730 50 140 55 95 90 200 50 TC1345 1B (Dual lane 3600 1800 2400 600 30 24 375 210Em 60 1095 75 210 85 140135 300 75 _ roadway) TC1345 _1C (Motorway) 4800 2400 3000 800 40 32 500 280Em 80 1460 100 280 110 190180 400 100

Notes

7. # - Text to be Helvetica Bold or equivalent. 1. This sign may be installed as an alternative to the MUTCD G6-1 Town Name sign. If an image is not 8. ## - Dimension "k" for the image height may be increased if required to suit the approved image. In this required and the town is not a state strategic touring route, TC1692 may be used in lieu. case, dimension "b" will also be increased by the same amount. The increase of total height of the sign is 2. *1 - Insert appropriate town name. Text to be Helvetica Bold or equivalent. If the name is longer than the not to exceed dimension b . max space allowed, email TrafficEngineering.support@tmr.qld.gov.au for assistance. 9. Image is to be a single high resolution image. 3. *2 - Insert appropriate destination name of the next accredited Visitor Information Centre (VIC) which 10. The image must be approved and supported by both the relevant Regional Tourism Organisation (RTO) may be the same as the town name above. If it is longer than the space allowed, email and local government. TrafficEngineering.support@tmr.qld.gov.au for assistance. 11. Image to be printed on a transparent overlay on a Class 1W retroreflective white background. 4. *3 - Insert appropriate distance to the VIC in kilometres. 12. Protective overlay film is recommended for this sign (excluding the VIC panel). 5. The visitor information centre panel must be installed with the welcome to town sign for towns which 13. Where single lane, dual lane and motorway signs are required, utilise G11-Q03 1A, G11-Q03 1B and _ _ have an accredited VIC. It is optional for towns which do not have a VIC and if desired may be installed G11-Q03 1C signs respectively. _ either with the welcome to town sign or as a stand-alone sign a short distance after the welcome sign. 14. Where signs with a tourist slogan may be required, refer to Page 2. 6. The white on blue roman “i” is not to be used as a substitute for the yellow italic “i”.

Department of Transport and Main Roads Infrastructure Management & Delivery Division APPROVED AS OFFICIAL TRAFFIC SIGN 17/02/21 PRINCIPAL ENGINEER Date (Traffic Engineering) TOWN WELCOME SIGN WITH IMAGE ONLY G11-Q03 1 _ Page 1 of 2

Designed RH 02/21 Checked DJ 02/21 Scale Not to Scale

a	b	b max	c	d e	f	g	h	k	m	n	o	p	q	r1	r2
TC1345 1A (Single lane _ roadway)	2400	1200	1800	400 2	0 16	250	140Em	40	730	50	140	55	95	90	200	50
TC1345 1B (Dual lane _ roadway)	3600	1800	2400	600 3	0 24	375	210Em	60	1095	75	210	85	140	135	300	75
TC1345 1C (Motorway)	4800	2400	3000	800 4	0 32	500	280Em	80	1460	100	280	110	190	180	400	100

a	b	b max	c	d	e	f	g	h	k	m	n	o	p	q	s	r1	r2
2400	1400	2000	400	20	16	25	0 140Em	40	730	60	100	90	140	55	95	200	50
3600	2100	2700	600	30	24	37	5 210Em	60	1095	90	150	135	210	85	140	300	75
4800	2800	3400	800	40	32	50	0 280Em	80	1460	120	200	180	280	110	190	400	100

Notes

This sign may be installed as an alternative to the MUTCD G6-1 Town Name sign. If an image is not required and the town is not a state strategic touring route, TC1692 may be used in lieu. *1 - Insert appropriate town name. Text to be Helvetica Bold or equivalent. If the name is longer than the space allowed, email TrafficEngineering.support@tmr.qld.gov.au for assistance. *2 - Insert appropriate tourist slogan. Text to be Helvetica or equivalent. The tourist slogan must be approved and supported by both the relevant Regional Tourism Organisation (RTO) and local government. *3 - Insert appropriate destination name of the next accredited Visitor Information Centre (VIC) which may be the same as the town name above. If the name is longer than the space allowed, email TrafficEngineering.support@tmr.qld.gov.au for assistance. The visitor information centre panel must be installed with the welcome to town sign for towns which have an accredited VIC. It is optional for towns which do not have a VIC and if desired may be installed either with the welcome to town sign or as a stand-alone sign a short distance after the welcome sign. The white on blue roman “i” is not to be used as a substitute for the yellow italic “I”. *4 - Insert appropriate distance to the VIC in kilometres. #1 - Text to be Helvetica Bold or equivalent. #2 - Text to be Helvetica or equivalent. #3 - Dimension "k" for the image height may be increased if required to suit the approved image. In this case, dimension "b" will also be increased by the same amount. The increase of total height of the sign is not to exceed dimension b max. Image is to be a single high resolution image. The image must be approved and supported by both the relevant Regional Tourism Organisation (RTO) and local government. Image to be printed on a transparent overlay on a Class 1W retroreflective white background. Protective overlay film is recommended for this sign (excluding the VIC panel). Where single lane, dual lane and motorway signs are required, utilise G11-Q03 2A, G11-Q03 2B and G11-Q03 2C signs respectively. Where signs without a tourist slogan may be required, refer to Page 1.

3000 R200 200 60 WELCOME TO 160* 210 1000 QUEENSLAND 270* 1500 330 FOR VISITOR INFORMATION 275 500 120D 30 210 135 190 220 175 190 Notes: 1. * Text is Helvetica Bold. 2. This sign may be installed at minor state border crossing Colour Legend points (i.e. any border crossing that is not located on a state strategic touring route) as an alternative to State Border Retroreflective white Queensland (G6-3 MUTCD) sign. 3. This sign should be installed as close as possible to the Retroreflective blue Queensland border but must be located within Queensland.
	WELCOME TO QUEENSLAND FOR NON-STATE STRATEGIC TOURING ROUTE
Department of Transport and Main Roads Infrastructure Management & Delivery Division	APPROVED AS OFFICIAL TRAFFIC SIGN 23/02/21 PRINCIPAL ENGINEER Date (Traffic Engineering)	G11-Q05
Designed RH 02/21	Checked DJ 02/21	Scale Not to Scale
A

4000 2000 2000 r200 125 60 WELCOME TO THE 135** 100 * TOURIST REGION NAME 230** 110 2200 1100 Image 1 Image 2 50 FOR VISITOR INFORMATION 250 140D 30 150 100 170 Notes: Colour Legend 1. This sign may be located at the entrance to a tourist region on a non-expressway type road. 2. Images are to be high resolution images printed on a transparent overlay on a Class 400 WELCOME TO THE Class 400 retroreflective white retroreflective background. FRASER COAST 3. The images must be approved and supported by the relevant Regional Tourism Organisation Class 400 retroreflective brown (RTO). If desired, a single image across the whole sign may be used in lieu of two images. 4. Protective overlay film recommended. Class 400 retroreflective blue 5. * Insert appropriate tourist region name (see page 9 for list). FOR VISITOR INFORMATION 6. ** Font is Helvetica Bold or equivalent. Class 400 retroreflective yellow EXAMPLE 7. If used on an expressway type road, refer GE11-060-Q01.
	Department of Transport and Main Roads Infrastructure Management & Delivery Division	ISSUED AS OFFICIAL TRAFFIC SIGN 24/02/26 DIRECTOR Date (Traffic Engineering)	TOURIST INFORMATION SIGN “WELCOME TO THE [TOURIST REGION NAME]” (1 LINE)	G11-060-Q01 1 (previously G11-Q04) Page 1 of 10
Designed RH 02/26	Checked DJ 02/26	Scale Not to Scale
A

TOURIST INFORMATION SIGN “WELCOME TO THE [TOURIST REGION NAME]” (2 LINES)

Item	Details
Dimensions	4000 2000 2000 r200 125 60 WELCOME TO THE 135 100 TOURIST REGION 230 130 NAME* 230** 150 2600 1100 Image 1 Image 2 50 FOR VISITOR INFORMATION 250 140D 30 100 150 170
Colour Legend	Class 400 retroreflective white; Class 400 retroreflective blue; Class 400 retroreflective yellow
Notes	1. This sign may be located at the entrance to a tourist region on a non-expressway type road. 2. Images are to be high resolution images printed on a transparent overlay on a Class 400 retroreflective background. 3. The images must be approved and supported by the relevant Regional Tourism Organisation (RTO). If desired, a single Class 400 retroreflective brown image across the whole sign may be used in lieu of two images. 4. Protective overlay film recommended. 5. * Insert appropriate tourist region name (see page 9 for list). 6. ** Font is Helvetica Bold or equivalent. 7. If used on an expressway type road, refer GE11-060-Q01.
Issued	Department of Transport and Main Roads Infrastructure Management & Delivery Division \| ISSUED AS OFFICIAL TRAFFIC SIGN 24/02/26 DIRECTOR Date (Traffic Engineering)
Sign number	G11-060-Q01 2 _ (previously G11-Q04) Page 2 of 10
Designed	RH 02/26
Checked	DJ 02/26
Scale	Not to Scale
	A

TOURIST INFORMATION SIGN “WELCOME TO [TOURIST REGION NAME]” (1 LINE)

Item	Details
Dimensions	4000 2000 2000 r200 125 60 WELCOME TO 135** 100 * TOURIST REGION NAME 230** 110 2200 1100 Image 1 Image 2 50 FOR VISITOR INFORMATION 250 140D 30 150 100 170
Colour Legend	Class 400 retroreflective white; Class 400 retroreflective brown; Class 400 retroreflective blue; Class 400 retroreflective yellow
Example	WELCOME TO OUTBACK QUEENSLAND; FOR VISITOR INFORMATION
Notes	1. This sign may be located at the entrance to a tourist region on a non-expressway type road. 2. Images are to be high resolution images printed on a transparent overlay on a Class 400 retroreflective background. 3. The images must be approved and supported by the relevant Regional Tourism Organisation (RTO). If desired, a single image across the whole sign may be used in lieu of two images. 4. Protective overlay film recommended. 5. * Insert appropriate tourist region name (see page 10 for list). 6. ** Font is Helvetica Bold or equivalent. 7. If used on an expressway type road, refer GE11-060-Q01.
Issued	Department of Transport and Main Roads Infrastructure Management & Delivery Division \| ISSUED AS OFFICIAL TRAFFIC SIGN 24/02/26 DIRECTOR Date (Traffic Engineering)
Sign number	G11-060-Q01 3 _ (previously G11-Q04) Page 3 of 10
Designed	RH 02/26
Checked	DJ 02/26
Scale	Not to Scale
	A

TOURIST INFORMATION SIGN “WELCOME TO [TOURIST REGION NAME]” (2 LINES)

Item	Details
Dimensions	4000 2000 2000 r200 125 60 WELCOME TO 135 100 TOURIST REGION 230 130 NAME* 230** 150 2600 1100 Image 1 Image 2 50 FOR VISITOR INFORMATION 250 140D 30 100 150 170
Colour Legend	Class 400 retroreflective white; Class 400 retroreflective brown; Class 400 retroreflective blue; Class 400 retroreflective yellow
Example	WELCOME TO TROPICAL NORTH QUEENSLAND; FOR VISITOR INFORMATION
Notes	1. This sign may be located at the entrance to a tourist region on a non-expressway type road. 2. Images are to be high resolution images printed on a transparent overlay on a Class 400 retroreflective background. 3. The images must be approved and supported by the relevant Regional Tourism Organisation (RTO). If desired, a single image across the whole sign may be used in lieu of two images. 4. Protective overlay film recommended. 5. * Insert appropriate tourist region name (see page 10 for list). 6. ** Font is Helvetica Bold or equivalent. 7. If used on an expressway type road, refer GE11-060-Q01.
Issued	Department of Transport and Main Roads Infrastructure Management & Delivery Division \| ISSUED AS OFFICIAL TRAFFIC SIGN 24/02/26 DIRECTOR Date (Traffic Engineering)
Sign number	G11-060-Q01 4 _ (previously G11-Q04) Page 4 of 10
Designed	RH 02/26
Checked	DJ 02/26
Scale	Not to Scale
	A

TOURIST INFORMATION SIGN “WELCOME TO THE [TOURIST REGION NAME]” WITH SLOGAN (1 LINE)

Item	Details
Dimensions	4000 2000 2000 r200 140 60 WELCOME TO THE 135** 105 * TOURIST REGION NAME 230 140 # Tourist Slogan 160 90 2500 1100 Image 1 Image 2 50 250 FOR VISITOR INFORMATION 140D 30 100 150 170
Colour Legend	Class 400 retroreflective white; Class 400 retroreflective brown; Class 400 retroreflective blue; Class 400 retroreflective yellow
Notes	1. This sign may be located at the entrance to a tourist region on a non-expressway type road. 2. Images are to be high resolution images printed on a transparent overlay on a Class 400 retroreflective background. 3. The images must be approved and supported by the relevant Regional Tourism Organisation (RTO). If desired, a single image across the whole sign may be used in lieu of two images. 4. Protective overlay film recommended. 5. * Insert appropriate tourist region name (see page 9 for list). 6. # Insert appropriate tourist slogan. Text to be Helvetica or equivalent. The tourist slogan must be approved and supported by both the relevant RTO and local governments. 7. ** Font is Helvetica Bold or equivalent. 8. If used on an expressway type road, refer GE11-060-Q01.
Issued	Department of Transport and Main Roads Infrastructure Management & Delivery Division \| ISSUED AS OFFICIAL TRAFFIC SIGN 24/02/26 DIRECTOR Date (Traffic Engineering)
Sign number	G11-060-Q01 5 _ (previously TC2269) Page 5 of 10
Designed	RH 02/26
Checked	DJ 02/26
Scale	Not to Scale
	A
4000 2000 2000 r200 155 60 WELCOME TO THE 135 120 TOURIST REGION 230 120 NAME* 230 130 Tourist Slogan # 160 120 2900 1100 Image 1 Image 2 50 250 FOR VISITOR INFORMATION 140D 30 100 150 170 Notes: 1. This sign may be located at the entrance to a tourist region on a non-expressway type road. Colour Legend 2. Images are to be high resolution images printed on a transparent overlay on a Class 400 retroreflective background. 3. The images must be approved and supported by the relevant Regional Tourism Organisation (RTO). If desired, a Class 400 retroreflective white single image across the whole sign may be used in lieu of two images. 4. Protective overlay film recommended. Class 400 retroreflective brown 5. * Insert appropriate tourist region name (see page 9 for list). 6. # Insert appropriate tourist slogan. Text to be Helvetica or equivalent. The tourist slogan must be approved and Class 400 retroreflective blue supported by both the relevant RTO and local governments. 7. ** Font is Helvetica Bold or equivalent. Class 400 retroreflective yellow 8. If used on an expressway type road, refer GE11-060-Q01.

	Department of Transport and Main Roads Infrastructure Management & Delivery Division	ISSUED AS OFFICIAL TRAFFIC SIGN 24/02/26 DIRECTOR Date (Traffic Engineering)	TOURIST INFORMATION SIGN “WELCOME TO THE [TOURIST REGION NAME]” WITH SLOGAN (2 LINES)	G11-060-Q01 6 _ (previously TC2269) Page 6 of 10
Designed RH 02/26	Checked DJ 02/26	Scale Not to Scale
A

4000 2000 2000 r200 Notes: 140 60 WELCOME TO 1. This sign may be located at the 135** entrance to a tourist region on a non- 105 * expressway type road. TOURIST REGION NAME 2. Images are to be high resolution 230** images printed on a transparent overlay on a Class 400 retroreflective 140 background. # Tourist Slogan 3. The images must be approved and 160** supported by the relevant Regional 90 Tourism Organisation (RTO). If desired, a single image across the whole sign may be used in lieu of two images. 2500 4. Protective overlay film recommended. 5. * Insert appropriate tourist region name (see page 10 for list). 1100 Image 1 Image 2 6. # Insert appropriate tourist slogan. Text to be Helvetica or equivalent. The tourist slogan must be approved and supported by both the relevant RTO and local governments. 50 7. ** Font is Helvetica Bold or equivalent. 250 FOR VISITOR INFORMATION 140D 8. If used on an expressway type road, 30 refer GE11-060-Q01. 100 150 170 Colour Legend WELCOME TO GLADSTONE Class 400 retroreflective white Southern Great Barrier Reef Class 400 retroreflective brown Class 400 retroreflective blue Class 400 retroreflective yellow EXAMPLE

	Department of Transport and Main Roads Infrastructure Management & Delivery Division	ISSUED AS OFFICIAL TRAFFIC SIGN 24/02/26 DIRECTOR Date (Traffic Engineering)	TOURIST INFORMATION SIGN “WELCOME TO [TOURIST REGION NAME]” WITH SLOGAN (1 LINE)	G11-060-Q01 7 _ (previously TC2269) Page 7 of 10
Designed RH 02/26	Checked DJ 02/26	Scale Not to Scale
A

4000 2000 2000 r200 Notes: 155 1. This sign may be located at the entrance 60 WELCOME TO to a tourist region on a non-expressway 135** type road. 120 2. Images are to be high resolution images TOURIST REGION printed on a transparent overlay on a 230** Class 400 retroreflective background. 3. The images must be approved and 120 NAME* supported by the relevant Regional 230** Tourism Organisation (RTO). If desired, a single image across the whole sign may be used in lieu of two images. 130 Tourist Slogan # 4. Protective overlay film recommended. 160** 5. * Insert appropriate tourist region name 120 (see page 10 for list). 2900 6. # Insert appropriate tourist slogan. Text to be Helvetica or equivalent. The tourist slogan must be approved and supported by both the relevant RTO and local governments. 1100 Image 1 Image 2 7. ** Font is Helvetica Bold or equivalent. 8. If used on an expressway type road, refer GE11-060-Q01. 50 250 FOR VISITOR INFORMATION 140D 30 100 150 170 WELCOME TO Colour Legend TROPICAL NORTH QUEENSLAND Class 400 retroreflective white Tourist Slogan Class 400 retroreflective brown Class 400 retroreflective blue FOR VISITOR INFORMATION Class 400 retroreflective yellow EXAMPLE

	Department of Transport and Main Roads Infrastructure Management & Delivery Division	ISSUED AS OFFICIAL TRAFFIC SIGN 24/02/26 DIRECTOR Date (Traffic Engineering)	TOURIST INFORMATION SIGN “WELCOME TO [TOURIST REGION NAME]” WITH SLOGAN (2 LINES)	G11-060-Q01 8 _ (previously TC2269) Page 8 of 10
Designed RH 02/26	Checked DJ 02/26	Scale Not to Scale
A

“WELCOME TO THE” WELCOME TO THE Tourist Region Name options FRASER COAST 1. Gold Coast 2. Fraser Coast 3. Sunshine Coast 4. Whitsundays FOR VISITOR INFORMATION WELCOME TO THE SUNSHINE COAST FOR VISITOR INFORMATION

	Department of Transport and Main Roads Infrastructure Management & Delivery Division	ISSUED AS OFFICIAL TRAFFIC SIGN 24/02/26 DIRECTOR Date (Traffic Engineering)	TOURIST INFORMATION SIGN “WELCOME TO THE [TOURIST REGION NAME]” EXAMPLES	G11-060-Q01 9 _ Page 9 of 10
Designed RH 02/26	Checked DJ 02/26	Scale Not to Scale
A

TOURIST INFORMATION SIGN “WELCOME TO [TOURIST REGION NAME]” EXAMPLES

“WELCOME TO” Tourist Region Name options	WELCOME TO
1. Queensland Country	GLADSTONE
2. Bundaberg	WELCOME TO
3. Gladstone	QUEENSLAND COUNTRY
4. Townsville	Southern Great Barrier Reef
5. Tropical North Queensland	FOR VISITOR INFORMATION
6. Outback Queensland	WELCOME TO
7. Brisbane	TROPICAL NORTH QUEENSLAND
8. Capricorn	FOR VISITOR INFORMATION
9. Mackay Isaac	Tourist Slogan

View this figure on page 109 of the PDF ↗

OVER DIMENSIONAL SIGN (START)p. 109

900 · R50 · 145 · START · 180DN · 750 · 100 · OD1 · 180DN · 25 · 145 · Route Colours Number Legend & Border Background · 1 Retroreflective white Retroreflective green · 2 Retroreflective white Retroreflective red · 3 Retroreflective white Retroreflective blue · 4 Retroreflective white Retroreflective brown · 5 Black Retroreflective yellow · 6 Black Retroreflective white · 7 Retroreflective white Retroreflective green · Colour Legend · Note: Route numbers as ordered. · Retroreflective green · Retroreflective white · G12-Q01 (previously G12-1) · Designed RH 2/96 · Checked JD 2/96 · Scale Not to Scale · Traffic & Road Use Management Division Traffic Engineering Section · APPROVED AS OFFICIAL TRAFFIC SIGN 01/03/01 · MANAGER Date (Traffic Engineering & Operations)

Route Colours

Route Number	Colours	Legend & Border
1	Retroreflective white	Retroreflective green
2	Retroreflective white	Retroreflective red
3	Retroreflective white	Retroreflective blue
4	Retroreflective white	Retroreflective brown
5	Black	Retroreflective yellow
6	Black	Retroreflective white
7	Retroreflective white	Retroreflective green

View this figure on page 110 of the PDF ↗

OVER DIMENSIONAL SIGN (DIRECTION ARROW)p. 110

900 · R50 · 60 · 75 · OD1 · 180DW · 150 · 300 · 25 · 60 · 75 · variable · 150 · 100 · TYPE 1 · OD1 · OD1 · TYPE 2 (L or R) · TYPE 3 (L or R) · Route Number Legend & Border Background Colours · 1 Retroreflective white Retroreflective green · 2 Retroreflective white Retroreflective red · 3 Retroreflective white Retroreflective blue · 4 Retroreflective white Retroreflective brown · 5 Black Retroreflective yellow · 6 Black Retroreflective white · 7 Retroreflective white Retroreflective green · Colour Legend · Notes: 1. Route number, direction and type as ordered. · 2. Centre letters and arrow on panel. · Retroreflective green · Retroreflective white · G12-Q02 (previously G12-2) · Designed RH 2/96 · Checked JD 2/96 · Scale Not to Scale · Traffic & Road Use Management Division Traffic Engineering Section · APPROVED AS OFFICIAL TRAFFIC SIGN 01/03/01 · MANAGER Date (Traffic Engineering & Operations)

Route Colours

Route Number	Legend & Border Colo	Background urs
1	Retroreflective white	Retroreflective green
2	Retroreflective white	Retroreflective red
3	Retroreflective white	Retroreflective blue
4	Retroreflective white	Retroreflective brown
5	Black	Retroreflective yellow
6	Black	Retroreflective white
7	Retroreflective white	Retroreflective green

View this figure on page 111 of the PDF ↗

OVER DIMENSIONAL SIGN (END)p. 111

750 · R50 · 145 · END · 180DN · 750 · 100 · OD1 · 180DN · 25 · 145 · Route Colours Number Legend & Border Background · 1 Retroreflective white Retroreflective green · 2 Retroreflective white Retroreflective red · 3 Retroreflective white Retroreflective blue · 4 Retroreflective white Retroreflective brown · 5 Black Retroreflective yellow · 6 Black Retroreflective white · 7 Retroreflective white Retroreflective green · Colour Legend · Note: Route numbers as ordered. · Retroreflective green · Retroreflective white · G12-Q03 (previously G12-3) · Designed RH 2/96 · Checked JD 2/96 · Scale Not to Scale · Traffic & Road Use Management Division Traffic Engineering Section · APPROVED AS OFFICIAL TRAFFIC SIGN 01/03/01 · MANAGER Date (Traffic Engineering & Operations)

Route Colours

Route Number	Colours	Legend & Border
1	Retroreflective white	Retroreflective green
2	Retroreflective white	Retroreflective red
3	Retroreflective white	Retroreflective blue
4	Retroreflective white	Retroreflective brown
5	Black	Retroreflective yellow
6	Black	Retroreflective white
7	Retroreflective white	Retroreflective green

Drawings from the original pages

p. 107