| 1 | 3 | Amendment | Added the following definitions to Table 3.1: Queensland Guide to Temporary Traffic Management (QGTTM) Road Infrastructure Manager (RIM) Traffic Management Designer (TMD) Traffic Management Implementer (TMI). |
| 3 | 2.5.3 | Amendment | Revised requirements for mounting signs in a more permanent manner. Any sign may be mounted in a permanent manner, while signs required for works which will be in progress for longer than 14 days are now recommended to be installed on posts. |
| 3.8.1 | Amendment | Revised requirement for detour markers at all intersections. Detour markers are required at all changes of direction and recommended at any intersection along the detour route where drivers may consider turning or require reassurance. Change the requirements for the END DETOUR sign from a “must” to a “should” be placed at the end of the detour. |
| 3.10.2 | Amendment | Clarified the location of additional signage for merging cyclists. |
| 4.8.3 | Amendment | Added “Additional” to the section heading. |
| 4.10.2 | Amendment | Clarified the location of additional signage for merging cyclists. |
| 5.3.2 | Amendment | Removed requirements for star pickets and replaced with a reference to the new Section 6.12 for star pickets. |
| 5.9.1 | Amendment | Replaced “Recommended” with “Minimum” in the section heading. |
| 5.10.1 | Amendment | Clarified the requirement that a risk assessment shall be undertaken where a PTCD is not used as recommended. Added a reference to GTMWOR Chapter 5 Section 2.2 which provides extra information regarding this risk assessment. |
| 5.11 | Amendment | Clarified the requirement for advance signs, estimating the end of queue position and calculating queue lengths of all traffic control stations as per requirements in Section 4.8 (including subsections) for traffic control stations using 'past' the worksite controls. |
| 5.13.2 | Amendment | Clarified the location of additional signage for merging cyclists. |
| 6.8 | Amendment | Removed the term “approved” from the road plating requirements as Transport and Main Roads does not approve or maintain an approved list for road plates. |
| 6.10.2 | Amendment | Corrected the incorrect references to Table 6.1 and Figure 6.2 to be Table 6.2 and Figure 6.1. |
| 6.12 | New | Added a new section containing the requirements for using star pickets. |
| 4 | 3.7.2 | Amendment | Added reference for the vehicle mounted warning device and arrow board to be visible to traffic from both approaches as per Figure 3.9. |
| 5 | 3.4 | Amendment | Changed requirement from one light to two lights for an inspection vehicle regularly used for that activity. Added where two lights are required, they are to be separated and placed as far apart as practical. Added sight distance requirements. Added option of using a LED light assembly / assemblies in lieu of a flashing lamp / lamps. |
| 8 | Appendix A Table A5 | Amendment | Replaced the reference to “Working Safely Near Traffic training unit competency” with “Working in Proximity to Traffic Awareness Part 1 competent person or a Queensland accredited traffic controller”. |
