3Referenced documents#

3.1Standards#

Table 3 lists documents referenced in this Technical Specification.

Table 3.1 – Referenced documents
ReferenceTitle
AS 1111.1ISO metric hexagon bolts and screws - Product grade C, Part 1: Bolts
AS 1112.3ISO metric hexagon nuts, Part 3: Product grade C
AS 1237.1Plain washers for metric bolts, screws and nuts for general purposes, Part 1: General plan
AS 1391Metallic materials – Tensile testing at ambient temperature
AS 1397Continuous hot-dip metallic coated steel sheet and strip – Coatings of zinc and zinc alloyed with aluminium and magnesium
AS 1743Road signs – Specifications
AS 1744Standard alphabets for road signs
AS 2082Timber – Hardwood – Visually stress-graded for structural purposes
AS 2423Coated steel wire fencing products for terrestrial, aquatic and general use
AS 2858Timber – Softwood – Visually stress graded for structural purposes
AS 3569Steel wire ropes – Product specification
AS 3972General purpose and blended cements
AS 4663Slip resistance measurement of existing pedestrian surfaces
AS 3730.10Guide to the properties of paints for buildings – Latex – Exterior – Gloss
AS 3730.13Guide to the properties of paints for buildings – Primer – Wood – Solvent-borne – interior / exterior
AS/NZS 1112.3ISO metric hexagon nuts - Product grade C
AS/NZS 1163Cold-formed structural steel hollow sections
AS/NZS 1214Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series)
AS/NZS 1252High strength steel fastener assemblies for structural engineering – Bolts, nuts and washers
AS/NZS 1390Cup head bolts with ISO metric coarse pitch threads
AS/NZS 1428.4.1Design for access and mobility – Part 4.1: Means to assist the orientation of people with vision impairment – Tactile ground surface indicators
AS/NZS 1554.1Structural steel welding - Welding of steel structures
AS/NZS 1580.481.1.10Paints and related materials - Methods of test - Coatings - Exposed to weathering - Degree of flaking and peeling
AS/NZS 1580.602.2Paints and related materials - Methods of test - Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
AS/NZS 1594Hot-rolled steel flat products
AS/NZS 1734Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate
AS/NZS 1906.1Retroreflective materials and devices for road traffic control purposes – Part 1: Retroreflective sheeting
AS/NZS 1906.2Retroreflective materials and devices for road traffic control purposes - Retroreflective devices (non-pavement application)
AS/NZS 3678Structural steel - Hot-rolled plates, floorplates and slabs
AS/NZS 3679.1Structural steel - Hot-rolled bars and sections
AS/NZS 3679.2Structural steel - Welded I sections
AS/NZS 3845 SetRoad safety barrier systems
AS/NZS 4600Cold-formed steel structures
AS/NZS 4680Hot-dip galvanized (zinc) coatings on fabricated ferrous articles
AS/NZS ISO 9001Quality management systems - Requirements
MRTS01Introduction to Technical Specifications
MRTS02Provision of Traffic
MRTS04General Earthworks
MRTS07AInsitu Stabilised Subgrades using Quicklime or Hydrated Lime
MRTS07BInsitu Stabilised Pavements using Cement or Cementitious Blends
MRTS07CInsitu Stabilised Pavements using Foamed Bitumen
MRTS08Plant-Mixed Heavily Bound (Cemented) Pavements
MRTS09Plant-Mixed Foamed Bitumen Stabilised Pavements
MRTS10Plant-Mixed Lightly Bound Pavements
MRTS50Specific Quality System Requirements
MRTS70Concrete
MRTS71Reinforcing Steel
MRTS72Manufacture of Precast Concrete Elements
MRTS73Manufacture of Prestressed Concrete Members and Stressing Units
MRTS78Fabrication of Structural Steelwork
MRTS91Conduits and Pits
MRTS278Supply of Structural Fasteners
MUTCDQueensland Manual of Uniform Traffic Control Devices, Transport and Main Roads
SCM-P-015Registration Scheme: Suppliers and products for Bridges and Other Structures
Technical Note 18Design Criteria for Motor Grids
Building Timbers: Properties and Recommendations for their Use in Queensland (Queensland Department of Primary Industries)
Traffic and Road Use Management Manual (TRUM), Volume 3, Part 5 - Design Guide for Roadside Signs
Road Safety Barrier Systems and Devices
Queensland Timber Utilisation and Marketing Act 1987

3.2Standard Drawings#

Table 3.2 lists the Standard Drawings referenced in this document.

Table 3.2 – Referenced Standard Drawings
Standard Drawing NumberTitle
1170Flood Depth Indicators – Installation
1294Sign – Roadwork Delineators
1295Sign – Fingerboard, Geographical Feature and Street Name Sign Bracket Details
1353Road Furniture – Vermin and Dog Fencing at Motor Grid
1354Road Furniture – Standard Bicycle Safe Fitting to Existing Motor Grid
1355Road Furniture – Alternative Bicycle Safe Fitting to Existing Motor Grid
1356Road Edge Guide Posts – Post and Installation Details
1363Traffic Sign – Multiple Traffic Sign Support (Drawing 1 of 2 and 2 of 2)
1364Traffic Sign – Connection Strap and Erection Cleat Details
1365Traffic Sign – Traffic Sign Support Breakaway Post Details (two or more supports)
1368Traffic Sign – Single Traffic Sign Support
1369Traffic Sign – Details of Sign Stiffening Extrusion
1452Traffic Sign – Sight Board (Drawing 1 of 3 to Drawing 3 of 3)
1458Single Slope Concrete Barrier - Precast Concrete Barrier Fabrication Details (Drawing 1 of 2 to 2 of 2)
1466Concrete Barriers – Typical Delineator Bracket Details
1467Concrete Barriers – Cast-in Anchor Assembly for Thrie Beam Terminal Connector
1468Single Slope Concrete Barrier – Extruded Median Barrier – Barrier, Reinforcing and Expansion Joint Details (Drawing 1 of 2 and Drawing 2 of 2)
1469Single Slope Concrete Barrier - Extruded Median Barrier - Details of Road Lighting Pole Cover Plates
1470Single Slope Concrete Barrier – Concrete Terminal for Median Barrier with Thrie Beam Guardrail Connection (Drawing 1 of 2 and Drawing 2 of 2)
1473Single Slope Concrete Barrier – Precast Concrete Barrier Installation Details
1474Steel Beam Guardrail – Installation and Setout
1475Steel Beam Guardrail – Installation on Bridge and Barrier Approaches
1476Steel Beam Guardrail – Terminal Components
1477Steel Beam Guardrail – Posts and Blockouts, Soil and Bearing Plates, Slip Base Plate
1478Steel Beam Guardrail – W Beam Anchor Bracket Delineation Unit Post on Base Plate Abraham Blockout
1479Steel Beam Guardrail – Bolts, Nuts, Screws and Washers Cable Assembly with Fasteners
1480Steel Beam Guardrail – Fabrication Details for W Beam Rails and Rail Components
Standard Drawing NumberTitle
1481Steel Beam Guardrail – Fabrication Details for Thrie Beam Rails and Rail Components
1482Steel Beam Guardrail – W Beam and Thrie Beam Assemblies
1486Single Slope Concrete Barrier – Concrete Terminal for Barrier with Thrie Beam Guardrail Connection (Drawing 1 of 2 and Drawing 2 of 2)
1518Banners on Light Poles – 2 Metre Banner Installation and Support Details (Drawing 1 of 2 and Drawing 2 of 2)
1561Road Furniture – Motor Grid – General Arrangement (Drawing 1 of 2 and Drawing 2 of 2)
1562Road Furniture – Motor Grid – Cast Insitu Abutment
1563Road Furniture – Motor Grid – Cast Insitu Base Slab (Drawing 1 of 2 and Drawing 2 of 2)
1564Road Furniture – Motor Grid – Precast Base Slab (Drawing 1 of 2 and Drawing 2 of 2)
1565Road Furniture – Motor Grid - Steelworks
1600Fencing – Rural Fence and Gates Timber Posts and Stays
1601Fencing – Rural Fence and Gates CHS Posts and Stays
1602Fencing – Chainwire Fences and Gates
1603Fencing – Koala Proof Fence and Gate
1604Fencing – Galvanized Welded Mesh Fencing
Source: MRTS14 · pages 9–12 Open PDF at this page Search this document