6Qualification criteria for operators#

This section provides guidance in TMA driver training requirements.

Mandatory requirements for TMA operators:

1. 1.Hold a current and valid Heavy Vehicle licence of a suitable class to operate the TMA.
2. 2.Hold a General Construction Induction Card – CPCCOHS1001A (White Card).
3. 3.Traffic control qualifications. TMA operators must be able to produce evidence that they have completed and maintained currency in traffic control training equivalent to RIIWHS302E 'Implement Traffic Management Plan'.
4. 4.Completed training and be deemed competent in the operation of a TMA equivalent to RIIRTM301E 'Operate a Truck or Trailer Mounted Attenuator'.

In addition to the above mandatory requirements, TMA operators also require Traffic Management Implement Training. For more information on Traffic Management Implement Training, refer to https://www.tmr.qld.gov.au/business-industry/Business-with-us/Traffic-Management/Traffic-management-training.

6.1Truck mounted attenuator operator training – gained qualifications and experience through competency-based assessment#

All TMA operators must successfully complete TMA operator training before operating the TMA. When training has been successfully completed, a statement that clearly identifies the trainee's name, when the training occurred (date of training), training content and trainer's details must be provided. The following elements of competency need to be covered and assessed for training of TMA operators.

6.1.1Plan and prepare#

• Access, interpret and apply compliance documentation relevant to work activity.
• Obtain and discuss safety requirements for the site; for example, Traffic Guidance Scheme (TGS) and Vehicle Management Plan (VMP).
• Set up TMA signage as required by TGS.
• Select vehicles, plant and equipment consistent with requirements for the job.

6.1.2Conduct truck and attenuator pre-operational checks#

Check truck and attenuator (including TMA pre-start check and TMA features and functions).

6.1.3Check truck mounted attenuator devices and identify positioning of truck mounted attenuator#

• Position and check TMA signs and devices.
• Check TMA vehicle warning lights and displays.
• Identify TMA position according to TGS.

6.1.4Use radio communication#

• Check radio.
• Test and verify radio contact between all vehicles and hand-held.
• Check radio contact periodically.
• Use radio communication between vehicles to confirm correct positioning of vehicle.

6.1.5Operate truck mounted attenuator#

• Identify site hazards associated with TMA operations.
• Identify and apply safe operating techniques for TMA.
• Operate TMA to work instructions, including closing lanes and working in a mobile/progressively moving work situation.
• Move TMA safely between work sites.

6.1.6Carry out operator maintenance#

Conduct inspection and fault finding.

In addition, all support staff working with a TMA must be inducted into the TMA, including the communication processes.