14Installing sealant#
14.1Apply sealant to enclosure ports after termination#
SEAL PORTS– After termination of the cables, the ports must be sealed with a two bottle sealant - a clear solution and a blue solution.
MIX SEALANT – Pour all of the clear solution and blue solution into the gel mixing bag.
SHAKE – Immediately shake the mixture vigorously for 20 seconds until well combined.
POUR IMMEDIATELY – Apply liquid sealant by pouring into ports, being careful not to overfill ports and flood the base.
CAUTION – Be careful not to move the cables around in the sealant prior to it setting to avoid compromising the seal.
14.2Sealant safety directions#
- Avoid contact with skin and eyes.
- Wear protective gloves and safety glasses.
- If poisoning occurs, contact a doctor or Poisons information centre.
- If swallowed, do not induce vomiting. Seek immediate medical attention.
- If in eyes, rinse eyes with water.
- If on skin, wash with soap and water.
