Skip to content
TTM WIKIby TekSwipe Traffic
  • Search
  • Ask AI
  • Quiz
  • Library
  • About
  • TekSwipe ↗
Sign in
Library›TRUM Vol 4 Part 4
TRUM Vol 4 Part 4

Contents

  • Copyright
  • Licence
  • CC BY licence summary statement
  • Translating and interpreting assistance
  • Feedback
  • 1Introduction
  • 2Definition of terms
  • 3Referenced documents
  • 4Items included in the kit
  • 5Prepare entry ports
  • 6Install heat shrink sleeves onto base
  • 7Prepare cable
  • 8Apply grey sealant to cables
  • 9Install cables in ports
  • 10Heating heat shrink sleeve
  • 11Installation instructions – active joint
  • 12Installation instructions – neutral joint
  • 13Install bracket
  • 14Installing sealant
  • 15Closing joint
  • 16Completion

Licence#

This work is licensed by the State of Queensland (Department of Transport and Main Roads) under a Creative Commons Attribution (CC BY) 4.0 International licence.

Source: TRUM Vol 4 Part 4 · page 2 Open PDF at this page Search this document
← PreviousCopyright Next →CC BY licence summary statement
TEKSWIPE TRAFFICTraffic management design & software · Cairns, QLD

TTM Wiki is built by TekSwipe Traffic. Need a traffic guidance scheme? Order a plan from TekSwipe Traffic ↗

TTM Wiki

  • Search
  • Ask AI
  • Quizzes
  • Document library
  • About

TekSwipe Traffic

  • tekswipetraffic.com.au ↗
  • Chainage — QLD chainage finder ↗

Unofficial reference. Always confirm requirements against the current official publication. Source documents © State of Queensland, used under their published licences.